2003 Mazda MX-5 Miata
Convertible 2D SE
Safety Ratings
Frontal crash ratings - Driver
Frontal crash ratings - Passenger
Side crash ratings - Driver
Side crash ratings - Passenger
Not Rated
NHTSA Rollover Resistance Rating
Recalls
US NHTSA CAMPAIGN ID: | 03V206 |
---|---|
Potential Number Of Units Affected: | 64,000 |
Summary:
On certain minivans and passenger vehicles, the socket holder in the fog lights is installed in the lamp casing using pressure. During operation of the fog light, the heat from the bulb can expand the socket holder. The expansion can force the socket holder rearward. After repeatedly being subject to this expansion, if the fog light is also subjected to vibration during vehicle operation, the socket holder with the bulb holder and the wiring harness may separate from the fog light casing. Should this occur, the bulb socket and the harness can drop inside the bumper, and the heat generated by the bulb can cause the bumper to burn.
Remedy:
Dealers will install a spring to prevent the socket holder from separating from the lamp case. The manufacturer has reported that owner notification began July 7, 2003. Owners may contact Mazda at 1-800-222-5500.
Dates of Manufacture:
July 2000 - May 2003
Manufacturer Recall Number:
1103F
Disclaimer
The safety ratings and information is provided directly from the
Insurance Institute for Highway Safety (IIHS)
and the National Highway Traffic Safety Administration (NHTSA)